Lancer Sportback L4-2.4L (4B12) (2010)
and the concentric slave cylinder.
^
If the O-rings or the clips of the clutch tube assembly, the clutch master cylinder, the concentric slave cylinder adapter and the concentric slave
cylinder are damaged, replace each assembly.
INSTALLATION SERVICE POINT
[A] CONCENTRIC SLAVE CYLINDER ADAPTER/CLUTCH TUBE ASSEMBLY CONNECTION
CAUTION
^
When connecting each part, check that the O-ring and clip are not damaged.
^
If any connection area or O-ring is dirty, clean with the clutch fluid.
Assemble the clip to the clutch master cylinder, clutch tube assembly B, and concentric slave cylinder. Then, connect the clutch tube assembly A and
concentric slave cylinder adapter.