mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Engine - Exhaust Valve Leak/Rough Idle|Page 2083 > < Ignition Lock Cylinder - Ignition Key Sticking|Page 2077
Page 1
background image

Valve Guide: All Technical Service Bulletins
Engine - Exhaust Valve Leak/Rough Idle

No: TSB-98-11-001
DATE: March, 1998
MODEL: 1989-98 Mirage 1.5L

SUBJECT:
EXHAUST VALVE LEAKAGE CAUSING ROUGH IDLE (4G15 ENGINE)

PURPOSE

This bulletin has procedures for diagnosing and repairing a rough idle condition caused by leaking exhaust valves, which may occur on 1989-98 Mirage
vehicles equipped with the 1.5L (4G15) engine.

The leaking exhaust valve causes low compression which creates rough idling.

BACKGROUND INFORMATION

Symptom

Affected vehicles may exhibit a rough idle condition

Cause

The rough idling may be attributed to low compression caused by poor sealing of the exhaust valves due to excessive wear of the valve guide inner
surfaces.

Remedy

FIELD FIX
Replace the valve guides with new sintered type listed in the parts information section of this bulletin.

PRODUCTION FIX

All new vehicles produced after December, 1997 (after engine No. TT2634) have the new-type sintered valve guides.

AFFECTED VEHICLES

1989-98 Mirage equipped with the 1.5L (4G15) engine produced before December, 1997 (up to engine No. TT2633)

PROCEDURE

Engine - Exhaust Valve Leak/Rough Idle|Page 2083 > < Ignition Lock Cylinder - Ignition Key Sticking|Page 2077