Mirage L4-1468cc 1.5L SOHC 12 Valve (1996)
Electric Load Sensor: Description and Operation
DESCRIPTION
The generator FR terminal converts the generator field coil ON/OFF conditions into voltage signals (low/high) and outputs them to the engine
control module. The engine control module detects the generator output current using these signals, and controls the idle air control motor
depending on the generator output current.
OPERATION
The generator output voltage is applied to the generator G terminal. If the generator G terminal is grounded by the engine control module, the
generator regulating voltage lowers and the generator output current stops flowing out. Accordingly, the generator output current can be regulated
by duty-controlling the continuity between G terminal and ground.
