Mirage L4-1468cc 1.5L SOHC 12 Valve (1996)
Idle Speed: Adjustments
Fixed SAS
NOTE:
1. The fixed SAS should not be moved unnecessarily; it has been precisely adjusted by the manufacturer.
2. If the adjustment for any reason is disturbed, readjust as follows.
(1) Loosen the tension of the accelerator cable sufficiently.
(2) Back out the fixed SAS lock nut.
(3) Turn the fixed SAS counterclockwise until it is sufficiently backed out, and fully close the throttle valve.
(4) Turn the fixed SAS clockwise until the throttle lever is touched (i.e., the point at which the throttle valve begins to open) is found. From that
point, turn the fixed SAS clockwise another 1-1/4 turn.
(5) While holding the fixed SAS so that it doesn't move, tighten the lock nut securely.
(6) Adjust the tension of the accelerator cable.
(7) Adjust the basic idle speed as directed below.
(8) Adjust the closed throttle position switch and throttle position sensor.
