Mirage L4-1468cc 1.5L SOHC 12 Valve (1996)
Throttle Position Sensor: Testing and Inspection
Component Tests
1. Disconnect the throttle position sensor connector.
2. Measure the resistance between the throttle position sensor side connector terminal No. 1 and terminal No. 4.
Standard value: 3.5 - 6.5 K Ohms
3. Measure the resistance between the throttle position sensor side connector terminal No. 2 and terminal No. 4.
4. If the resistance is outside the standard value, or if it doesn't change smoothly, replace the throttle position sensor.