Mirage L4-1468cc 1.5L SOHC 12 Valve (1996)
Throttle Valve Cable/Linkage: Technical Service Bulletins
A/T Throttle (Kickdown) Cable - Replacement Procedures
NO.: TSB-96-23-005
DATE: March, 1996
MODEL: 1989-96 Mirage
SUBJECT:
A/T THROTTLE (KICKDOWN) CABLE REPLACEMENT PROCEDURES
TSB Revision TSB-96-23-005
PURPOSE
This bulletin contains procedures for securing and adjusting the transmission throttle (kickdown) cable stopper when replacing the cable on a 1989-96
Mirage equipped with the F3A2 transaxle. This information is not included in the service manuals for the affected vehicles.
Add the following transmission throttle cable replacement procedures to the indicated page in each affected manual. Write the TSB revision number of
this bulletin in the "TSB Revision" box at the bottom of the affected service manual page.
AFFECTED VEHICLES
1989-96 Mirage equipped with F3A2 Automatic Transaxle
AFFECTED MANUALS
1989 Mirage, Volume 1, page 21-91
1990 Mirage, Volume 1, page 23-34
1991 Mirage, Volume 1, page 23-87
1992 Mirage, Volume 1, page 23-76
1993-96 Mirage, Volume 1, page 23-56
PROCEDURE
SECURING AND ADJUSTING THE THROTTLE CABLE STOPPER
When replacing the old throttle (kickdown) cable with a new one, secure the stopper on the new cable by using the following procedures:
1.
Connect the throttle cable to the transmission. Route the cable correctly and clamp it in the proper points. (Do not connect the cable to the throttle
body at this time).
2.
Pull back cable dust cover to expose the stopper.
