Mirage L4-1597cc 1.6L DOHC (1990)
Technical Service Bulletin # 9011007
Date: 901001
Tools - Piston Pin Tool Operating Instructions
SUBJECT:
PISTON PIN INSTALLATION TOOL
INSTRUCTIONS
NO.
TSB-90-11-007
DATE
October, 1990
MODEL
All
PURPOSE
This bulletin is issued to update the operating instructions that were sent along with the OTC Piston Pin Service Set. An illustration and parts list for the
Piston Pin Service Set appears on Page 5 of this bulletin. When using the Piston Pin Service Set, use these operating instructions.
OPERATING INSTRUCTIONS
Piston Pin Removal
Figure 1
1.
Remove the stop screw from the base. See Figure 1.
Figure 2
2.
Refer to the application chart on Page 4, and select the correct piston support for your application. Fit the piston support onto the base. Place the
base onto press support blocks. See Figure 2.