Mirage L4-1597cc 1.6L DOHC (1990)
(2) Locate the pinhole in the tensioner pulley shaft to the left of the center bolt. Then, tighten the center bolt finger-tight.
Caution: Leave the wire installed in the auto tensioner.
19. INSTALLATION OF TIMING BELT
(1) Turn the two sprockets so that their dowel pins are located on top. Then, align the timing marks facing each other with the top surface of
the cylinder head. When you let go of the exhaust camshaft sprocket, it will rotate one tooth in the counter-clockwise direction. This should
be taken into account when installing the timing belt on the sprockets.
NOTE: The same camshaft sprocket is used for the intake and exhaust camshafts and is provided with two timing marks. When the sprocket is
mounted on the exhaust camshaft, use the timing mark on the right with the dowel pin hole on top For the intake camshaft sprocket,
use the one on the left with the dowel pin hole on top.
