Mirage L4-1597cc 1.6L DOHC (1990)
3.
Remove the rubber fuel pump vibration dampener to expose the fuel filter retaining clip (or nut). Remove the retaining clip (or nut) and the filter.
4.
Install the new fuel filter onto the fuel pump. If specified in the Service Manual, tighten the fuel filter retaining nut to the proper torque.
5.
Before installing the fuel pump into the tank, observe the condition of the old fuel filter. If the filter was severely clogged, clean the inside of the
fuel tank thoroughly.
6.
Using a new gasket, install the fuel pump into the fuel tank. Re-assemble all other components.
7.
After installing the fuel pump, run the engine to verify normal operation.
PARTS INFORMATION
For most vehicles, the fuel pump gasket and filter are available from your facing PDC on a stock or daily order. Refer to the latest parts microfiche for
correct part numbers.
WARRANTY INFORMATION
For fuel pump filter replacement:
(Fuel pump filter replacement is a 12/12 coverage item.)
Position Code:
136011
Labor Operation Code:
13601110
Nature Code:
05D
Cause Code
570
Use normal warranty procedures.