Mirage L4-1597cc 1.6L DOHC (1990)
Using special tools, install the taper roller bearings on both sides of the differential case.
CAUTION: When press-fitting the bearings, push the inner race only.
3. INSTALLATION OF BALL BEARING - F5M21
Using special tools, install the ball bearings on both sides of the differential case.
1. INSTALLATION OF BOLTS
Apply specified adhesive to the entire threads of the bolts and quickly tighten in the order shown to specified torque.
Specified adhesive: 3M Stud Locking No. 4170
CAUTION: If a bolt is reused, remove traces of oil adhesive completely from the threads.