Mirage L4-1597cc 1.6L DOHC (1990)
Install the synchronizer spring so that its protrusion fits into the groove in the synchronizer key. Make sure that the protrusions in the front and rear
springs are not in the groove of the same key.
11. INSTALLATION OF 3RD-4TH SPEED SYNCHRONIZER ASSEMBLY
1. Install the synchronizer assembly with its hub end face having a small round depression in the oil groove facing the 3rd speed gear.
NOTE: The assembly may not be installed if set oppositely because it has been so designed that the end face of hub inside splines with a
small round depression is easier to be inserted.
2. Press the 3rd-4th speed synchronizer assembly onto the input shaft using the special tool as illustrated.
CAUTION: When installing the synchronizer assembly, make sure that three synchronizer keys are seated correctly in respective grooves of
the synchronizer ring.
3. Check the 3rd speed gear rotates smoothly.
9. INSTALLATION OF BEARING SLEEVE
