Mirage L4-1597cc 1.6L DOHC (1990)
Use the special tool as illustrated.
CAUTION: Do not reuse the bearing removed from the shaft.
3. REMOVAL OF TAPER ROLLER BEARING - F5M22 / 5. 1ST SPEED GEAR
Use the special tool as illustrated.
CAUTION:
1. Do not reuse the bearing removed from the shaft.
2. Replace the inner and outer races of the taper roller bearing as a set.
11. REMOVAL OF 1ST-2ND SPEED SYNCHRONIZER HUB / 13. 2ND SPEED GEAR
Remove the 1st-2nd speed synchronizer assembly and 2nd speed gear together using the special tool as illustrated.
15. REMOVAL OF BALL BEARING - F5M21
