Mirage L4-1597cc 1.6L DOHC (1990)
Output Shaft: Service and Repair
DISASSEMBLY AND REASSEMBLY
SERVICE POINTS OF DISASSEMBLY
1. 2.
REMOVAL OF TAPER ROLLER BEARINGS
Use the special tool as illustrated.
CAUTION:
1. Do not reuse the bearings removed from the shaft.
2. Replace the inner and outer races of the taper roller bearing as a set.
SERVICE POINTS OF REASSEMBLY
2. 1.
INSTALLATION OF TAPER ROLLER BEARINGS
Use the special tool as illustrated.
CAUTION: When installing the bearing, push the inner race only.
