Mirage L4-1597cc 1.6L DOHC Turbo (1989)
Throttle Body Stay
4.
Remove the throttle body stay.
5.
Remove the four bolts securing the throttle body to the intake air plenum and remove the throttle body.
INSTALLATION
1.
Install a new gasket.
2.
Install the throttle body and torque the bolts, in a cross-pattern, to 11 - 16 ft.lbs. (15 - 22 N-m).
3.
Install the throttle body stay.
4.
Reconnect the throttle cable ( and cruise control cable, if equipped).
5.
Reconnect the intake air duct.
6.
Refer to ADJUSTMENT PROCEDURES.