Mirage L4-1597cc 1.6L DOHC Turbo (1989)
Throttle Valve Cable/Linkage: Adjustments
Throttle Control Cable
Fig. 6 Adjusting Throttle Control Cable
1.
Place carburetor throttle lever in curb idle position.
2.
Raise throttle cable cover ``B'' upward, then loosen cable lower mounting bracket bolt, Fig. 6.
3.
Move cable lower mounting bracket until clearance between nipple and top of cable cover ``A'' is .02-.06 inch, then tighten cable lower mounting
bracket bolt to 9 to 10.5 ft. lbs.
4.
With throttle lever in wide open position, pull throttle cable upward to ensure cable has freedom of movement.
