Mirage L4-1597cc 1.6L SOHC Turbo (1985)
Radiator Cooling Fan Temperature Sensor / Switch: Service and Repair
CORDIA, GALANT, MIRAGE, STARION W/INTERCOOLER & TREDIA
1.
Disconnect battery ground cable.
2.
Drain cooling system, then disconnect thermo sensor electrical connector.
3.
Remove thermo sensor from radiator.
4.
Reverse procedure to install, noting the following:
a. Apply suitable sealant to threaded portion of sensor.
b. Torque sensor to 7-14 ft. lbs. on all except Starion with intercooler or 10-12 ft. lbs. on Starion with intercooler.