Mirage L4-1597cc 1.6L SOHC Turbo (1985)
Throttle Position Sensor: Testing and Inspection
Fig. 34 Checking throttle position sensor.
1985 - 86
1.
Place ignition switch to ``Off' position, then disconnect sensor electrical connector, Fig. 34.
2.
Check resistance between terminals 1 and 3. Resistance should be 4 - 6 ohms.
3.
Connect suitable tester across terminals 1 and 2 or 2 and 3, and ensure that when throttle valve is slowly operated from idle to fully opened
position, resistance changes smoothly. Replace sensor as required.
