mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Engine Coolant Temperature Switch (A/C) <--> [Coolant Temperature Sensor/Switch (For Computer)] > < Water Temperature Switch - Torque Specification
Page 1
background image

Coolant Temperature Sensor / Switch HVAC: Technical Service Bulletins
A/C - Water Temperature Switch Torque Spec Revision

SUBJECT:

WATER TEMPERATURE SWITCH TORQUE SPECIFICATION REVISION
NO.    STB-85-24-010

DATE  December 1985

MODEL Models with A/C
This bulletin supersedes STB-85-24-001 which is invalid and should be discarded!

FIGURE 1

PURPOSE This bulletin presents revised torque specifications for the water temperature switch in the thermostat housing on some models equipped with
air conditioning. See Fig. 1.
CAUTION Excessive tightening torque will crack the thermostat housing!

TORQUE SPECIFICATIONS 10-14 N-m (7-10 ft.lbs)

NOTE:
After torquing the switch, be sure to re-connect the wire which serves as a ground for the A/C compressor. Without this ground, the compressor will not
operate!

Engine Coolant Temperature Switch (A/C) <--> [Coolant Temperature Sensor/Switch (For Computer)] > < Water Temperature Switch - Torque Specification