Mirage L4-1795cc 1.8L SOHC (1994)
Wheel Cylinder: Service and Repair
Removal and Installation
1. Remove wheel, drum and brake shoes.
2. Loosen brake line fitting at wheel cylinder. Do not pull metal line away from cylinder.
3. Remove screw holding cylinder to backing plate.
4. Separate wheel cylinder from brake line and backing plate by pulling cylinder outward and away from backing plate.
1. Wipe end of hydraulic line to remove any foreign matter.
2. Position wheel cylinder to backing plate. Install brake line to cylinder and start connecting fitting.
3. Secure wheel cylinder to backing plate, then complete tightening of brake line fitting.
4. Install brake shoes, drum and wheel.
5. Bleed brake system.
