Mirage L4-1795cc 1.8L SOHC (1994)
Temperature Gauge: Testing and Inspection
Engine Coolant Temperature Gauge Unit Inspection
Engine Coolant Temperature Gauge Unit Inspection
Engine Coolant Temperature Gauge Unit Inspection
To check, remove engine coolant temperature gauge unit from intake manifold.
Standard Resistance of Engine Coolant Temperature Gauge Unit
1. Immerse unit in 70°C (158 °F) water to measure resistance.
Standard value: 104 ± 13.5 Ohms
2. After checking, apply the specified adhesive around the thread of engine coolant temperature gauge unit and install on the intake manifold.
Specified sealant: 3M Adhesive nut locking No.4171
