Mirage L4-1795cc 1.8L SOHC (1994)
^
1992 Eclipse and 1992 Galant, 4G6 (2.0L)
^
1992 Expo and 1992 Truck, 4G6 (2.4L)
^
1992-95 Mirage, 4G1 (1.5L)
^
1992-94 Eclipse, 4G3 (1.8L)
^
1992-95 Truck, 1992-95 Diamante, 1993-95 Diamante Wagon, 1992-95 3000GT, 1995 Galant, and 1992-95 Montero, 6G7 (3.0L)
^
1994-95 Montero, 6G7 (3.5L)
To install non-elastic cylinder head bolts, use the following procedure. The 6G7 DOHC Turbo engine contains an additional step, as indicated in the
chart below.
1.
Progressively torque each bolt to specification, in three steps.
2.
In each step, the bolts are tightened according to sequence.
Cylinder Head Bolt Tightening Torque for Non-Elastic Bolts
Tightening Sequences for Non-Elastic Cylinder Head Bolts
Elastic Cylinder Head Bolts (Plastic/Angle Tightening Method) The following vehicles/engines use elastic cylinder head bolts:
^
1993-95 Mirage and 1992-95 Expo LRV, 4G9 (1.8L)
^
1993-95 Eclipse and 1993 Galant, 4G6 (2.0L)
^
1993-95 Expo, 1993-95 Expo LRV, 1993-95 Truck, and 1994-95 Galant, 4G6 (2.4L)
^
1995 Eclipse, 420A (2.0L)
