mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Engine Lubrication > < A/C Idler Pulley - Pinging Knocking Noise
Page 1
background image

Idler Pulley: Customer Interest
A/C Idler Pulley - Pinging Knocking Noise

NO.: TSB-96-55-009

DATE: November, 1996

MODEL: 1993-96 Mirage

SUBJECT:
A/C IDLER PULLEY NOISE

PURPOSE

The A/C idler pulley may cause a pinging or knocking noise during acceleration, especially under moderate load at about 2,000 engine rpm. A new,
redesigned A/C idler pulley is available to eliminate the noise.

AFFECTED VEHICLES

1993-96 Mirage models equipped with 4G93 1.8L engine

PROCEDURE

1.

Confirm that the noise is coming from the A/C idler pulley:

a. With the engine off, remove the A/C compressor drive belt.

CAUTION

This will disable the power steering pump. Use care during test drive to steer the vehicle.

b. Test drive the vehicle. Listen for a pinging or knocking noise during acceleration at about 2,000 engine rpm. If the noise continues, refer to the

diagnosis information in Section 11 and/or Section 17 of the 1993-96 Mirage service manual.

2.

If the noise is not heard during the test drive, replace the A/C idler pulley using the pulley listed in the PARTS INFORMATION section of this
bulletin.

3.

Reinstall the A/C compressor drive belt.

PARTS INFORMATION

Description

Part Number

A/C Idler Pulley

MR315434

WARRANTY INFORMATION

A/C Idler Pulley

Nature Code: 99G

Cause Code: 990

Labor Operation No. 55314310

Time Allowance: 0.4 hr. 

Warranty Coverage: 36 months/36,000 miles.

Special Warranty Information: Normal warranty procedures apply.

Engine Lubrication > < A/C Idler Pulley - Pinging Knocking Noise