Mirage L4-1795cc 1.8L SOHC (1994)
Clutch Pedal Assembly: Adjustments
Cable Operated
1. Measure distance between upper surface of floor board and top of clutch pedal.
2. Pedal height should be 6.2-6.4 inches.
3. If clutch pedal height is not as specified in step 1, check pedal stopper of pedal support member for deterioration and replace as necessary.
Fig.1 Clutch Pedal Height, Freeplay & Floorboard Clearance Measurement
4. Measure clutch pedal freeplay "B", Fig. 1. Freeplay should be 0.8-1.2 inches.
Fig.2 Clutch Pedal Freeplay Adjustment
5. If freeplay is not as specified in step 5, turn outer cable adjusting nut at bulkhead in engine compartment and adjust clutch cable freeplay "C" to
0.20-0.25 inch, Fig. 2.
6. After adjusting pedal freeplay, depress clutch pedal several times, then with pedal fully depressed check clutch pedal to floor board clearance.
7. Clearance should be 3.1 inches or more.
8. If clutch pedal clearance is not as specified in step 5 or if clutch pedal stroke is not as specified in step 6, clutch assembly is defective. Repair
clutch assembly as required.
