mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Starting and Charging|Testing and Inspection > < Fuel System Pressure Relief|Page 4396
Page 1
background image

Battery: Description and Operation

CAUTION:  When batteries are being charged, an explosive gas forms beneath the cover of each cell. Do not smoke near batteries on charge or which
have recently been charged. Do not break live circuits at the terminals of the batteries on charge. A spark will occur where the live circuit is broken.
Keep all open flames away from the battery.

Battery electrolyte temperature may temporarily be allowed to rise to 55°C (131°F). Increase of electrolyte temperature above 55°C (131 °F) is harmful
to the battery, causing deformation of battery cell, decrease in life of battery, etc.

Charge Rate Chart

Charge Rate

If the test indicator is white, the battery should be charged as outlined below.
When the dot appears or when maximum charge shown below is reached, charging should be stopped.

NOTE:   If the indicator does not turn to blue even after the battery is charged, the battery should be replaced; do not overcharge.

Starting and Charging|Testing and Inspection > < Fuel System Pressure Relief|Page 4396