Mirage L4-1795cc 1.8L SOHC 16 Valve (1995)
Alternator Relay: Testing and Inspection
Generator Relay Continuity Check
1. Remove the generator relay from the relay box inside the engine compartment.
2. Use an ohmmeter to check that there is continuity when the (+) terminal of the tester is connected to terminal 4 of the generator relay and the (-)
terminal is connected to terminal 2.
3. Next, check that there is no continuity when the (+) terminal is connected to terminal 2 and the (-) terminal is connected to terminal 4.
4. If the continuity checks in steps (2) and (3) show a defect, replace the generator relay.