Mirage Coupe DE L4-1468cc 1.5L SOHC MFI (1997)
Brake Pad: Service and Repair
CAUTION: Do not wipe off the special grease that is on the slide pin or allow it to contaminate the friction surface of the pads.
NOTE: Refer to the illustration and disconnect or remove the following.
REPLACEMENT
1. Slid pin (M14 bolt).
2. Slid pin (M10 bolt).
3. Torque member (pad, pad liner and shim).
4. Pad and wear indicator assembly (LH) or pad assembly (RH).
5. Outer shim (coated with rubber) and pad liner.
6. Reverse procedure to install, noting the following:
-
Measure the brake drag force. If the drag force of the disc brake exceeds the standard value, disassemble piston and clean piston.
