Mirage Sedan DE L4-1468cc 1.5L SOHC MFI (1997)
Air Bag(s) Arming and Disarming: Vehicle Damage Warnings
If the SRS components are to be removed or replaced as a result of maintenance, troubleshooting, etc., follow each procedure.
CAUTION:
1. SRS components should not be subjected to heat over 93° C (200° F), so remove the SRS-ECU, air bag modules, and clock spring before drying
or baking the vehicle after painting. Recheck SRS system operability after re-installing them. Please include instructions or where instructions may
be found, for "Recheck SRS system operability".
2. If the SRS components are removed for the purpose of inspection, sheet metal repair, painting, etc., they should be stored In a clean, dry place
until they are reinstalled.