mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Terminal Resistance & Continuity Check|Page 4190 > < Terminal Resistance & Continuity Check|Page 4188
Page 2
background image

(Part 2 Of 2)

NOTE:

-

Measure the voltages between terminals Nos. 15, 25 and 42 (ground terminals) and each respective terminal.

-

Do not measure terminal voltage for approximately 3 seconds after the ignition switch is turned on. The ABS-ECU performs the initial check for
that period.

-

The terminal layouts are shown in the illustration. 

Terminal Resistance & Continuity Check|Page 4190 > < Terminal Resistance & Continuity Check|Page 4188