mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Replacement and Overhaul|Page 4350 > < Replacement and Overhaul
Page 2
background image

DISASSEMBLY

Remove Or Disconnect The Following:
1. Reservoir cap assembly   
2. Reservoir cap            
3. Diaphragm
4. Brake fluid level sensor
5. Float
6. Reservoir stopper bolt
7. Reservoir tank
8. Reservoir seal

9. Piston stopper ring while depressing piston

10. Primary piston assembly
11. Secondary  piston assembly
12. Master cylinder body.

INSTALLATION

-

Reverse removal and disassembly procedure to install, noting the following:

-

Bleed hydraulic system. See: Brake Bleeding/Service and Repair

Replacement and Overhaul|Page 4350 > < Replacement and Overhaul