mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Recall - Crankshaft Pulley Bolt|Page 1243 > < Recall - Crankshaft Pulley Bolt|Page 1241
Page 5
background image

8.

Reinstall the drive belts.

9.

Reinstall the undercover.

10.

Reinstall front passenger side tire and wheel assembly. Tighten the wheel nuts to 88-108 Nm (65-80 ft/lbs).

PARTS INFORMATION
A small supply of 5 pulley bolts will be allocated to all dealers. Orders for additional pulley bolts can be placed through the normal parts system.

WARRANTY INFORMATION
Claims for this campaign must be entered as Recall type "C" claims on your Diamond Network Service Menu. Sample claim screens are shown on the
next pages.

Allowable Parts: Refer to the PARTS INFORMATION section of this bulletin.

Recall - Crankshaft Pulley Bolt|Page 1243 > < Recall - Crankshaft Pulley Bolt|Page 1241