mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Hose/Line HVAC|Service and Repair|Page 5172 > < Heater Core Case|Service and Repair
Page 1
background image

Hose/Line HVAC: Service and Repair

REMOVAL AND INSTALLATION

REMOVAL SERVICE POINT
<A> HOSE/PIPE/RECEIVER ASSEMBLY DISCONNECTION

Plug the disconnected hose, the receiver, the evaporator and the compressor nipple not to let foreign matter get into them.

CAUTION:  Seal the hoses completely, otherwise the compressor oil and receiver will absorb water vapor easily.

INSTALLATION SERVICE POINT
>A< SUCTION HOSE/RECEIVER ASSEMBLY INSTALLATION

When replacing the suction hose or receiver assembly, refill them with a specified amount of compressor oil, and then install them.
Compressor oil: SUN PAG 56

Hose/Line HVAC|Service and Repair|Page 5172 > < Heater Core Case|Service and Repair