Mirage Sedan DE L4-1468cc 1.5L SOHC MFI (1997)
Brake Light Switch: Testing and Inspection
STOP LAMP SWITCH CHECK
Connect an ohmmeter to the stop light switch, and check whether or not there is continuity when the plunger of the stop light switch is pushed in
and when it is released. The stop light switch is in good condition if there is no continuity when the plunger is pushed in to a depth of within 4 mm
(0.16 inch) from the outer case edge surface, and if there is continuity when it is released. For vehicles with an auto-cruise control system, the
check for continuity should be made at connectors "a" and "b" of the stop light switch.
