mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

ABOUT US
Snap Ring (For Adjustment of Front Bearing Clearance)|Page 3949 > < Snap Ring (For Adjustment of Front Bearing Clearance)|Page 3947

Mirage Sedan DE L4-1468cc 1.5L SOHC MFI (1997)

Page 5
background image

B. Ball bearing installation. (27)

C. Snap ring installation. (26)

Select and install a snap ring so that the input shaft front bearing clearance will have the standard value. 
Standard value: -0.01 - 0.12 mm (-0.0004 - 0.0047 inch) 

D. Synchronizer spring installation. (7, 11, 19 & 23)

Install the synchronizer spring to the illustrated position of the synchronizer ring.

E. 3rd-4th speed synchronizer hub installation. (21)

Install the 3rd-4th speed synchronizer hub so that it will be oriented in the direction shown.

Snap Ring (For Adjustment of Front Bearing Clearance)|Page 3949 > < Snap Ring (For Adjustment of Front Bearing Clearance)|Page 3947