mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Snap Ring (For Adjustment of Front Bearing Clearance)|Page 3950 > < Snap Ring (For Adjustment of Front Bearing Clearance)|Page 3948
Page 6
background image

CAUTION:  When installing the hub, check that the synchronizer ring is not caught.

F. Synchronizer sleeve installation. (20)

1. Install the synchronizer sleeve so that it will be oriented in the direction shown.

2. When the synchronizer sleeve is installed, check that the deep groove portion of the synchronizer hub is aligned with the projecting portion

of the sleeve.

G. 4th speed gear sleeve installation. (17)

Snap Ring (For Adjustment of Front Bearing Clearance)|Page 3950 > < Snap Ring (For Adjustment of Front Bearing Clearance)|Page 3948