Mirage Sedan DE L4-1468cc 1.5L SOHC MFI (1997)
Output Shaft
Check the splices for damage and wear.
Needle Roller Bearing
1. Check that when the bearing sleeve and gear are combined and made to rotate, they rotate smoothly without looseness and noise.
2. Check to ensure that the cage is not deformed.
Synchronizer Ring
1. Check to ensure that the clutch gear tooth surfaces are not damaged and broken.
2. Check to ensure that the cone inside diameter is not damaged or worn and that the threads are not crushed.
3. Press the synchronizer ring against the gear and check clearance "A." If "A" is less than the limit, replace.
Limit: 0.5 mm (0.020 inch)
Outer Synchronizer Ring/Inner Synchronizer Ring/Synchronizer Cone
1. Check to ensure that the clutch gear tooth surfaces and cone surfaces are not damaged and broken.