Mirage Sedan LS L4-1834cc 1.8L SOHC MFI (1999)
Brake Caliper: Service and Repair
Replacement
REMOVAL AND INSTALLATION
INSTALLATION SERVICE POINT
>A< DISC BRAKE ASSEMBLY INSTALLATION
1. In order to measure the brake drag force after pad installation, measure the rotary-sliding resistance of the hub by the following procedure with
the pads removed.
(1) Remove the drive shaft.
(2) Attach the special tool to the front hub assembly as shown in the illustration, and tighten it to the specified torque.
Tightening torque: 177-275 Nm (130-203 ft. lbs.)
(3) Use a spring scale to measure the rotary-sliding resistance of the hub in the forward direction.
