Mirage Sedan LS L4-1834cc 1.8L SOHC MFI (1999)
Fuel Pressure Release: Service and Repair
FUEL PUMP CONNECTOR DISCONNECTION (HOW TO REDUCE PRESSURIZED FUEL LINES)
When removing the fuel pipe, hose, etc., since fuel pressure in the fuel pipe line is high, do the following operation so as to release fuel pressure in the
line and prevent fuel from running out.
1. Raise the rear seat cushion.
2. Disconnect the body wiring harness and fuel wiring harness under the floor carpet.
3. After starting the engine and letting it run until it stops naturally, turn the ignition switch to OFF.
4. Connect the fuel wiring harness and body wiring harness.
5. Install the rear seat cushion.
