mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Refrigerant Leak Repair|Page 4975 > < Refrigerant|Capacity Specifications|Page 4972
Page 1
background image

Refrigerant: Service and Repair
Refrigerant Leak Repair

REFRIGERANT LEAK REPAIR

LOST CHARGE

If the system has lost all charge due to a leak:

1. Evacuate the system. (See procedure.)
2. Charge the system with approximately one pound of refrigerant.
3. Check for leaks.
4. Discharge the system.
5. Repair leaks.
6. Replace receiver drier.

CAUTION:  Replacement filter-drier units must be sealed while in storage. The drier used in these units will absorb water/water vapor quickly
upon exposure to the atmosphere. When installing a drier, have all tools and supplies ready for quick reassembly to avoid keeping the system open
any longer than necessary.

7. Evacuate and charge system.

LOW CHARGE

If the system has not lost all of its refrigerant charge; locate and repair all leaks. If it is necessary to increase the system pressure to find the leak (because
of an especially low charge) add refrigerant. If it is possible to repair the leak without discharging the refrigerant system, use the procedure for correcting
low refrigerant level.

Refrigerant Leak Repair|Page 4975 > < Refrigerant|Capacity Specifications|Page 4972