Mirage Sedan LS L4-1834cc 1.8L SOHC MFI (1999)
Fuel Gauge: Testing and Inspection
Fuel Gage Resistance Check
FUEL GAUGE RESISTANCE CHECK
1. Remove the power supply tightening screw.
2. Use an ohmmeter to measure the resistance value between the terminals.
Standard value:
Power supply - Ground: 192 ± 19.2
Power supply - Fuel gauge: 89 ± 8.9
Fuel gauge - Ground: 103 ± 10.3
3. If within the standard value, the fuel gauge is OK. If not within the standard value, replace the fuel gauge.
CAUTION: When inserting the testing probe into the power supply terminal, be careful not to touch the printed board.
