Mirage Sedan LS L4-1834cc 1.8L SOHC MFI (1999)
the wires are diagnosed as faulty, replace or repair the wiring harness according to the following table.
6. SRS components should not be subjected to heat over 93° C (200° F), so remove the SRS-ECU, air bag module and clock spring before drying or
baking the vehicle after painting.
7. Whenever you finish servicing the SRS, check warning light operation to make sure that the system functions properly.
8. Make certain that the ignition switch is OFF when the scan tool is connected or disconnected.
NOTE: SERIOUS INJURY CAN RESULT FROM UNINTENDED AIR BAG DEPLOYMENT, SO USE ONLY THE PROCEDURES
AND EQUIPMENT SPECIFIED.
