Mirage Sedan LS L4-1834cc 1.8L SOHC MFI (1999)
Stop Lamp Switch: Testing and Inspection
STOP LIGHT SWITCH CHECK
Connect an ohmmeter to the stop light switch, and check whether or not there is continuity when the plunger of the stop light switch is pushed in and
when it is released.
The stop light switch is in good condition if there is no continuity when the plunger is pushed in to a depth of within 4 mm (0.16 inch) from the outer
case edge surface, and if there is continuity when it is released.
For vehicles with auto-cruise control system, the check for continuity should be made at connectors "a and "b" of the stop light switch.
