mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Brake Bleeding > < Refrigerant Oil|Capacity Specifications|Page 1084
Page 1
background image

Refrigerant Oil: Service and Repair

REFILLING OF OIL IN THE A/C SYSTEM

Too little oil will provide inadequate compressor lubrication and cause a compressor failure. Too much oil will increase discharge air temperature.
When a compressor is installed at the factory, it contains 150 cc (5.1 fl.oz.) of refrigerant oil. While the A/C system is in operation, the oil is carried
through the entire system by the refrigerant. Some of this oil will be trapped and retained in various parts of the system.
When the following system components are changed, it is necessary to add oil to the system to replace the oil being removed with the component.
Compressor oil: SUN PAG 56

Quantity:
Evaporator: 60 cc (2.0 fl.oz.)
Condenser: 15 cc (0.5 fl.oz.)
Suction hose: 10 cc (0.3 fl.oz.)
Receiver: 10 cc (0.3 fl.oz.)

Brake Bleeding > < Refrigerant Oil|Capacity Specifications|Page 1084