Mirage Sedan LS L4-1834cc 1.8L SOHC MFI (1999)
Throttle Position Sensor: Testing and Inspection
Component Tests
THROTTLE POSITION SENSOR CHECK
1. Disconnect the throttle position sensor connector.
2. Measure the resistance between the throttle position sensor side connector terminal 1 and terminal 4.
Standard value: 3.5 - 6.5 kOhms
3. Measure the resistance between the throttle position sensor side connector terminal 2 and terminal 4.
Normal condition:
4. If the resistance is outside the standard value, or it it doesn't change smoothly, replace the throttle position sensor.
NOTE: After replacement, the throttle position sensor should be adjusted. (Vehicles without auto-cruise control system: auto-cruise control
system.) (Vehicles with auto-cruise control system.)
