mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

PCM - DTC P0120 TP/Engine Surge/Sag|Page 3439 > < PCM - DTC P0120 TP/Engine Surge/Sag|Page 3437
Page 4
background image

To verify that the correct reprogramming has been made, the ROM ID number will display on the MUT-II screen. The table below shows the
vehicle models and their appropriate PCM part numbers ROM ID numbers that display after reprogramming. Also enter the appropriate vendor
number listed below.

17.

Using a ball-point pen, enter the appropriate PCM part number, vendor number, ROM ID #, this TSB number (TSB-99-13-007), your dealer code,
and the current date on the Engine Compartment Label.

NOTE

If the Engine Compartment Label does not provide a space for the vendor number and ROM ID #, write this information in as shown:

18.

Carefully remove all dirt and oil from the vacant area shown on the underside of the hood. Affix the Engine Compartment label in the area shown.

19.

Using a ball-point pen, enter the new PCM part number, vendor code, this TSB number (TSB-99-13-007), your dealer code, and the current date
on the Control Module Label.

PCM - DTC P0120 TP/Engine Surge/Sag|Page 3439 > < PCM - DTC P0120 TP/Engine Surge/Sag|Page 3437