Mirage Sedan LS L4-1834cc 1.8L SOHC MFI (1999)
3. Connect two wires, each six meters (20 feet) or longer, to the two leads of SRS air bag adapter harness B (driver's side) or SRS air bag adapter
harness A (front passenger's side), and cover the connections with insulation tape. The other ends of the two wires should be connected to each
other (short-circuited), to prevent sudden unexpected deployment of the air bag module.
4. Prepare the air bag modules as follows:
a. Connect the deployment wires to the SRS air bag adaptor harness A, pass it beneath the tire and wheel assembly, and connect it to the air bag
module.
b. Pass the thick wires into the hole of the air bag module bracket, and secure it to the wheel of the old tire with wheel (4 locations), with the air
bag facing upwards.
CAUTION
a. Leave some space below the wheel for the deployment wires.
b. If there is no space, the reaction of the air bag deployment could result in damage of the adaptor harness.
c. During deployment takes place, do not have the connector of the SRS air bag adaptor harness A inserted between the tires.
c. Place four old tires without wheels on top of the tire secured to the air bag module, and secure all tires together with ropes (4 locations).