mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Key Reminder Switch|Testing and Inspection|Page 386 > < Fuel Gauge Sender|Testing and Inspection|Page 382
Page 1
background image

Key Reminder Switch: Testing and Inspection

KEY REMINDER SWITCH CONTINUITY CHECK

1. Remove the column cover lower and upper.

2. Disconnect the wiring connector from the key reminder switch or from the key hole illumination light and connect an ohmmeter to the switch side

connector.

3. Check the continuity when the ignition key is pulled out of and inserted into the steering lock cylinder

Key Reminder Switch|Testing and Inspection|Page 386 > < Fuel Gauge Sender|Testing and Inspection|Page 382