Mirage Sedan LS L4-1834cc 1.8L SOHC MFI (1999)
Use a piece of pipe or similar tool to remove the oil seal from the gear housing.
CAUTION: Be careful not to damage the inner surface of the rack cylinder of the gear housing.
Reassembly Service Points
>A<Oil Seal Installation
>B<Needle Roller Bearing/Ball Bearing Installation
>C<Rack Installation
1. Apply a coating of repair kit grease to the rack tooth face.
CAUTION: Do not close the vent hole in the rack with grease.
2. Cover rack serrations with special tool.
3. Apply the specified fluid to the special tool.
Specified fluid: Automatic transmission fluid "DEXRON II"
4. Match the oil seal center with rack to prevent retainer spring from slipping and slowly insert rack from power cylinder side.
