Mirage Sedan LS L4-1834cc 1.8L SOHC MFI (1999)
1. Secure the nut on the clutch hose and loosen the flare nut on the clutch pipe.
2. Remove the hose clip from the clutch hose to remove clutch hose from bracket.
INSTALLATION SERVICE POINT
>A< CLUTCH HOSE/CLUTCH PIPE INSTALLATION
1. Temporarily tighten the clutch pipe flare nut by hand, and then tighten it to the specified torque. Being careful that the clutch hose does not
become twisted.
2. After tightening the clutch pipe flare nut and eye bolt, check to be sure there is no leakage of the clutch fluid.
INSPECTION
-
Check the pedal shaft bushing for wear.
-
Check the pedal arm for bend or torsion.
-
Check the master cylinder or clutch hose for fluid leakage.
-
Check the clutch hose or pipe for cracks or clogging.