Mirage Sedan LS L4-1834cc 1.8L SOHC MFI (1999)
Synchronizer Hub: Customer Interest
M/T - Grinding Noise When Shifting From 1st to 2nd Gear
NO: TSB-99-22-001
DATE: March, 1999
MODEL: 1997-99 Mirage
SUBJECT:
GRINDING NOISE WHEN SHIFTING FROM 1ST TO 2ND GEAR
PURPOSE
Some affected vehicles may experience a grinding noise when shifting from 1st to 2nd gear. The noise is most noticeable with cold engine and may fade
as the engine and transmission warm up. An improved 1st-2nd synchronizer hub with additional oil grooves is now available to eliminate this condition.
AFFECTED VEHICLES
1997-99 Mirage 1.8L engine models equipped with manual transmission produced before 1/23/99
PROCEDURE
Replace the 1st-2nd synchronizer hub with the new, improved hub listed in the PARTS INFORMATION section of this bulletin. Refer to Group 22 of
the appropriate service manual for replacement procedures.
PARTS INFORMATION
Description
Part Number
1st-2nd Gear Synchronizer Hub
MR518582
WARRANTY INFORMATION
Normal warranty procedures apply.