mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 4199 > < Initial Inspection and Diagnostic Overview|Page 4197
Page 19
background image

Q: Is the harness wire damaged? 
YES: Repair it and then go to Step 7. 
NO: Go to Step 7.

STEP 7. Retest the system. 
1. Apply a chock to the wheel. 
2. Start the engine. 
3. When 120 seconds or more have been elapsed since the engine was started, release the parking brake lever and fully depress the brake pedal

repeatedly 15 to 20 times within 10 seconds.
Q: Does the buzzer sound? 
YES: The procedure is complete. 
NO: Start over at Step 1.

Inspection Procedure 4

INSPECTION PROCEDURE 4: The Buzzer does not Stop Sounding.

Initial Inspection and Diagnostic Overview|Page 4199 > < Initial Inspection and Diagnostic Overview|Page 4197